Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pull off the metal cover to gain access to the motherboard.
-[* red] Remove the connectors first using precision tweezers. In total you will remove fifteen connectors wires.
+[* red] Remove the connectors first using precision [product|IF145-020|tweezers]. In total you will remove fifteen connectors wires.
[* icon_note] Some connectors are under the sticky patch, be sure you remove all of them.
[* orange] Use a Phillips PH00 screwdriver to remove the 4.3mm screw holding the motherboard to the main camera body.