Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Collin Rapp

Düzenleme onaylandı tarafından Collin Rapp

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert the spudger into the seam where the front and back parts of the case meet on the bottom of the camera and slide it along the bottom. Continue along the next side to separate the back part of the case.
+[* black] Insert the plastic opening tool into the seam where the front and back parts of the case meet on the bottom of the camera, and slide it along the bottom. Continue along the next side to separate the back part of the case.
[* icon_note] If necessary, continue along the third and fourth sides until the case separates easily.
[* black] Lift the back off of the case.