1. Adımdaki Değişiklikler
Düzenleyen: Yegor Shea —
Düzenleme onaylandı tarafından Yegor Shea
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Using a Phillips head screw driver, remove the two screws for the metal plate on the bottom. |
|---|---|
| - | [* black] detach the smaller ribbon cables (in orange) by sliding them out. |
| - | [* black] detach the large ribbon cable (in yellow) by flipping the small black holder in an upright position and then sliding the cable out carefully. |
| + | [* red] Using a Phillips head screw driver, remove the two screws for the metal plate on the bottom. |
| + | [* orange] Detach the smaller ribbon cables by sliding them out. |
| + | [* yellow] Detach the large ribbon cable by flipping the small black holder in an upright position and then sliding the cable out carefully. |
| + | [* icon_caution] Patience is key with these ribbon cables, do not rush it or they ***WILL*** rip. |