How to bleed the Stroker Trail 3 No'lu Adım Geçmişi

	[* black] Adjust the braking lever to a 45° angle and remove the bleeding screw.
-	[* black] Fill up ~~half~~ the bleeding syringe with DOT 5.1 brake fluid. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.
+	[* black] Fill up a quarter of the bleeding syringe with DOT 5.1 brake fluid. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.
	[* icon_caution] Make sure there are no bubbles that can get into the system during the bleeding procedure.