Nook Simple Touch with GlowLight Teardown 18 No'lu Adım Geçmişi

18. Adımdaki Değişiklikler

Düzenleyen: Jake Devincenzi — 28 May 2012

-	[* black] The Nook Simple Touch with GlowLight
-	[* black] That is why we are giving it a repairability score of 9/10.
-	[* green] Simple, standard screws.
-	[* yellow] Tape, which may have to be replace during reassembly, is everywhere.
-	[* red] The display assembly is all one piece, so any damage would mean replacing the whole thing.
+	[* black] The Nook Simple Touch with GlowLight performed very well repairability-wise. Here is our last (we promise) glowing review.
+	[* black] Nook Simple Touch with GlowLight Repairability Score: 9 out of 10 (10 is easiest to repair).
+	[* green] Opening it was very simple, and aside from the massive amounts of adhesive, every part came free rather easily.
+	[* green] There was a total of only 12 screws (all T5 Torx), 11 of which were the same length.
+	[* green] The battery can be replaced by taking out one screw and one connector.
+	[* yellow] Every single internal component is held down by a lot of tape or glue, which may need to be reapplied upon reassembly.
+	[* red] The front glass, GlowLight LEDs, and digitizer are fused together, so breaking any of these parts will require replacement of the entire display assembly.