HTC Vive Sensor Array Replacement 3 No'lu Adım Geçmişi

-	[* icon_caution] Be careful not to lift the sensor array too far from the rest of the device because the ~~interior~~ ribbon cable may tear.
+	[* icon_caution] Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear.
	[* black] Slightly lift the sensor array away from the rest of the Vive and hold it in place.
	[* red] Disconnect the camera by lifting its ribbon cable up and away from the motherboard using a pair of ESD safe tweezers.
-	[* icon_note] The ~~interior~~ ribbon cable ~~should~~ be ~~pressed into~~ its socket vertically, ~~which can be frustrating since~~ all other ribbon cables slide ~~in horizontally~~.
-	[* black] Lift the sensor array away from the motherboard.
+	[* icon_note] The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out vertically.
+	[* black] Lift the sensor array away from the motherboard fully.