Ana içeriğe geç

15. Adımdaki Değişiklikler

Düzenleyen: Nikki

Düzenleme onaylandı tarafından Nikki

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] After the vane has finished drying; check to see if the vane is on correctly and straight. If so, the vane was properly replaced. If not, refer back to step 1 and start over.
-[* black] Note: If the vane is fixed, you may apply a small amount of acetone onto another q-tip and wipe off any excessive glue. Be sure not to wipe the new arrow vane.
+[* black] If the vane is fixed, you may apply a small amount of acetone onto another q-tip and wipe off any excessive glue. Be sure not to wipe the new arrow vane.