Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Eric Flores

Düzenleme onaylandı tarafından Eric Flores

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Cross Member
[* black] Place the radio with the front facing down and the top of the radio facing you.
-[* red] Using the #1 Phillips screwdriver, remove the seven screws holding the Cross Member in place.
-[* icon_caution] The screw called out in yellow is slightly different than the other screws. The length is the same but it has a tighter thread pitch.
+[* red] Remove the seven 6 mm screws holding the Cross Member in place.
+[* icon_caution] The screw called out in yellow is slightly different than the other screws. The length is the same but it has a tighter thread pitch. Make sure it goes back in the same place.