Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: Eric Flores

Düzenleme onaylandı tarafından Eric Flores

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] It is difficult to see all of the circuit board's screws from one angle. This series of photos starts at the top center and moves clockwise around the circuit board.
+[* icon_note] It is difficult to see all of the circuit board's screws from one angle. This series of photos starts at the top center and moves clockwise around the circuit board.
[* icon_note] Screws are only called out when they make their first unobstructed appearance.
-[* red] Using a #1 Phillips screwdriver, remove the 10 screws holding the circuit board in place.
-[* icon_caution] The screw in the black square is not part of the main circuit board and should not be removed.
+[* icon_note] The screw in the black square is not part of the main circuit board and should not be removed.
+[* red] Remove the ten 4 mm screws holding the circuit board in place.