Ana içeriğe geç
Yardım

MacBook Pro 13" Unibody Mid 2009 Trackpad Replacement

Adım 6 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 5kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Next, reinstall the four 1.2 mm Phillips screws along the inner edge of the trackpad.

Tighten the screws all the way, then back them out about 1/4 turn.

Check the alignment of the trackpad on the keyboard side of the upper case. Once you have centered the trackpad in the upper case, tighten the four Phillips screws all the way.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.