Ana içeriğe geç
Yardım

Samsung Galaxy S7 Edge Rear Glass Replacement

Adım 2 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.

The suction cup will not adhere well on the curved portion of the glass.

If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

Lift on the suction cup and insert an opening pick under the rear glass.

Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.