Ana içeriğe geç
Yardım

Apple Watch Battery Replacement

Adım 5 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 5kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Once you've opened the gap enough, insert the tip of an opening pick under the glass.

Slide the pick along the bottom edge to separate adhesive holding the screen to the case.

Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.