Ana içeriğe geç
Yardım

iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

Adım 9 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 16 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Reheat the iOpener and place it on the top edge of the iPad, over the front-facing camera.

Be careful not to overheat the iOpener during the repair procedure. Wait at least ten minutes before reheating the iOpener.

If you have a flexible iOpener, you can bend it to heat both the upper left corner and the upper edge at the same time.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.