Ana içeriğe geç
Yardım

Sony α6500 Motherboard Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran kılavuzu etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove two 2.5mm JIS 00 screws from the left side and bottom of the copper shielding.

Remove two 2mm JIS 000 screws from the right side of the copper shielding.

Pull the entire copper shielding piece off.

When replacing the shielding, make sure to position the wire ribbon slot under the tabs designed to hold it down.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.