Ana içeriğe geç
Yardım

Sony α6500 Top Assembly Replacement

Adım 10 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use the plastic opening tool to peel down the rubber grip around the handle at least 1 cm.

The adhesive holding the rubber grip down should be strong enough to reattach when you are done. If not, you may need an adhesive to reglue it.

Remove one 3 mm JIS 000 screw from underneath the rubber grip on the right side.

Remove one 4 mm JIS 000 screw from the left side.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.