Ana içeriğe geç
Yardım

How to Repair a Chipped Skateboard

Adım 7 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Put the trucks of the board back on by first inserting the screws back in from the top.

Then fit the trucks to align with the screws and place nuts over area where the screws are overlapping.

Tighten the nuts using the socket and the screws with the Phillips #2 screwdriver.

8x25mm Phillips #2 screws and 8x3/8 Nuts

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.