The two remaining strips (14 and 15) do not have guide holes and are more difficult to place. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.

Grasp the red pull tab on strip 14 and pull to remove the backing from the strip.

Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.

The strip should be positioned such that the L-bend sits next to the right vertical adhesive. The L-bend should not overlap the right vertical adhesive.

Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.