Ana içeriğe geç
Yardım

How To Apply Stretch Release Battery Adhesive

Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The stretch release adhesive strips will be applied to the rear of the replacement battery, and may need to be cut to length.

If you don't need to cut the adhesive strips to length, skip the next two steps.

Lay the stretch release adhesive strips next to your replacement battery, aligning the pull tabs slightly above the top edge of the battery.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.