Ana içeriğe geç
Yardım

MacBook Air 13" Early 2020 Audio Board Replacement

Adım 3 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use the flat end of a spudger to pry the audio board connector straight up to disconnect it from the board.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.