Ana içeriğe geç
Yardım

Opening Procedure and Battery Disconnect

Adım 18 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 17 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use a pair of tweezers to peel back the silver tape covering the left display cable connector.

Do not remove the tape from the ribbon cable.

Insert the flat end of a spudger underneath the tape and pry up on the connector to disconnect it from the motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.