Ana içeriğe geç
Yardım

Mavic 2 Arm Replacement

Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

On the topside of the drone,desolder the wires from the main board that correspond to the arm trying to be replaced, there should be six in total.

Remove the arm once all wires are desoldered.

Make note of where each wire goes on the board as the colors may not be the same across all models.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.