Ana içeriğe geç
Yardım

Meta Quest 2 Front Cover Replacement

Adım 2 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 11 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The front cover is still held in place by clips along the bottom and side edges.

Insert an opening pick into the seam between the bottom edge of the front cover and the headset.

Pry with the opening pick to release the front cover clips.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.