Ana içeriğe geç
Yardım

PlayStation Portal Battery Replacement

Adım 4 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Repeat the procedure to remove the three remaining adhesive strips.

If a strip broke and you couldn't retrieve it:

Apply a few drops of high concentration (>90%) isopropyl alcohol underneath the edge of the battery nearest the broken strip.

Wait one minute to allow the isopropyl alcohol to weaken the adhesive.

Slide an opening pick under a loose edge of the battery and gently pry up the battery.

Be careful not to bend the battery. If it feels stuck, apply a few more drops of isopropyl alcohol and try again.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.