Ana içeriğe geç
Yardım

PlayStation Portal Vibration Motor Replacement

Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

When you solder the wires during reassembly:

Flip the Portal over such that its back side faces you.

The black wire should be soldered to the upper contact on the vibration motor.

The red wire should be soldered to the lower contact on the vibration motor.

This is true for either vibration motor and ensures that they spin in the proper direction.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.