Ana içeriğe geç
Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Here is the keyboard ribbon cable seated in the zero insertion force (Zif) connector.

Release the ZIF connector to which the keyboard cable is attached, by lifting the clasp in an upward direction. Disconnect the keyboard cable from the system board.

Release the Zif connector to which the power button board cable is connected, by lifting the clasp of the Zif connector in an upward direction.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.