Ana içeriğe geç
Yardım

RazorX DLX Electric Skateboard Control Module Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 3kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Flip the skateboard back over.

Remove the six 22 mm bolts indicated on the top side of the skateboard with a 3 mm Allen key.

While holding the nut from the underside of the skateboard remove the four 32 mm bolts with the 3 mm Allen key.

Separate the trucks and control module from the board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.