Use angled tweezers to grip the black pull tab at the bottom right corner of the 5G mmWave antenna.

Press the antenna down with your free hand and use your tweezers to pull the stretch‑release adhesive strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the antenna.

To better grip the adhesive strip, you can twist it around the tip of the tweezers while you pull.

If the adhesive strip breaks off, try to retrieve it with your tweezers and continue pulling.

If you can't retrieve the strip, follow the next two steps for an alternate method. Otherwise, skip the next two steps.