Ana içeriğe geç
Yardım

Power Mac G5 Processor and Cooling Unit Replacement

Adım 5 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran kılavuzu etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

NOTE: Here are the standoffs without the cooling unit installed to make it easier to understand where the screws are located. Remove the bottom 2 standoffs so it is easier to remove the power supply.

Check the pin connections for any damage. All the pins highlighted in yellow should appear straight up and not appear bent. DON'T TOUCH THE PINS. A bent pin will result in your computer not powering on.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.