Ana içeriğe geç
Yardım

MacBook Air 13" Mid 2013 Trackpad Replacement

Adım 5 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 3kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

During reassembly, check the clicking action on the trackpad.

The 1.4 mm T5 Torx screw near the front edge of the case must be adjusted correctly.

If overtightened, the button will cease to click at a certain point. Adjust the set screw until the clicking side of the trackpad has minimal play.

It's not necessary to remove this screw in order to remove the trackpad.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.