Ana içeriğe geç
Yardım

iPhone 4 Display Assembly Replacement

Adım 6 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the three large-headed 1.5 mm Phillips screws along the SIM card side of the iPhone.

Keep track of the washers under each of the screws.

Tip: It can be tricky, but it is also possible to just loosen the large-headed 1.5 mm Phillips screws slightly, without having to remove and replace the screw-and-washer set.

Remove the small-headed 1.5 mm Phillips screw near the rear camera (previously removed).

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.