Ana içeriğe geç
Yardım

Repairing a Hole in a Fiber Glass Jet Ski Body

Adım 10 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

After you have again mixed your resin, begin by applying a small layer to the inside of the hole only.

Place your fiberglass piece onto the resin in the hole, and then continue to coat the layer in resin until soaked.

Continue this process with all layers until resin surface is flush with existing surface.

Again, let the resin dry for the designated period of time provided on the back of the resin container.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.