Ana içeriğe geç
Yardım

How to Replace a Rear Brake Cable

Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Flip bike back right-side-up.

Slide the connector up near the housing holder. About an inch between the connector and holder should be fine.

Using the smart wrench and 10mm socket wrench, tighten the nut so it grips the brake line firmly.

Using wire-cutters, cut the extra cable so only about an inch remains.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.