Ana içeriğe geç
Yardım

Apple Watch 42mm Glass Digitizer Only Replacement

Adım 1 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Heat the screen up so that the entire display and watch are warm. Be sure to turn the device off first by holding down the crown then sliding to power off. Using a sharp blade start at the bottom right corner and lift the glass up enough to create a gap, once you have a large enough gap use a plastic tool to break the adhesive bond around the edges

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.