Ana içeriğe geç
Yardım

Canon Powershot SD880 Front Cover Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 2kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.

The two screws on the other side of the camera were already removed when the back cover was taken off.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.