Ana içeriğe geç
Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Insert the pry tool along the side of the device. Pry gently until you hear clicks.

Repeat along all sides of the phone, you will continue hearing a clicking sound as the frame begins to release.

Gently pull the battery clip up (shown in photo 2). Then, twist the frame slightly clockwise, as there is a little clip around the camera that needs to be released.

Once the back frame has been removed, the motherboard and connectors will be exposed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.