Ana içeriğe geç
Yardım

iMac Intel 21.5" EMC 2428 Power Supply Replacement

Adım 1 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.

Remove the following four screws securing the power supply to the outer case:

One 9.3 mm T10 coarse-threaded screw

One 25 mm T10 coarse-threaded screw

Two 22 mm T10 fine-threaded screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.