Ana içeriğe geç
Yardım

Samsung WB850F Control Panel Replacement

Adım 1 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Use the Phillips #0 screwdriver to remove the six outside screws. Orientation is from the front of the camera.

2 screws are located on the bottom.

2 screws are located on the left side. (HDMI port)

2 screws are located on the right side of the camera. (Opposite HDMI side)

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.