For this step, orient the netbook with the screen folded down and the netbook flat on the ground with the back facing up. The battery compartment should be facing you.

Locate the two 7 mm screws in the holes on either side of the battery compartment

This next step is challenging and requires the use of both hands or the help of another person.

Opening up the computer screen, find the 3mm gold screw housing to the inside of each hinge point. These are next to the 7mm screws you removed in the previous step.

In this next step, you will remove the 7 mm screw from the side of the battery compartment while holding the gold 3 mm screw housing in place.

Position the netbook on its side. The side that is on the ground should not be the side that has the 7 mm screw you are trying to remove.

Hold the gold 3 mm screw housing in place using the black tweezers. Simultaneously remove the 7 mm screw on the side of the battery compartment, using the PH00 (+) Philips screwdriver head.

The screen will still be connected to the motherboard so do not try to pull it apart.