Ana içeriğe geç
Yardım

Nikon D610 Motherboard Replacement

Adım 1 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The rear side of the camera is where the motherboard is located. It is visible after you have taken off the rear face plate.

Remove the shield that protects it from static first.

This shield has six Philips #00 screws that are positioned around the edge of the shield.

After removal of the screws the shield will come free from the motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.