Ana içeriğe geç
Yardım

Sony Cyber-shot DSC-HX9V Rear Case Replacement

Adım 5 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Once all the screws are removed, partially lift the rear case upward and install a rubber band.

The LCD screen will be loose. The use of a tight fitting rubber band will prevent the LCD screen from sliding. The rubber band will only be temporary.

After installation of the rubber band, open the HDMI dust plug located on the right hand side of the camera and continue to tilt the rear case backwards until it is removed.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.