Ana içeriğe geç
Yardım

iPad 3 4G Front Panel Assembly Replacement

Adım 7 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Without removing the iSesamo, rotate it around the bottom left corner of the iPad.

Be very careful that the iSesamo does not slip as you move it around the corner. The touchscreen ribbon cable is located approximately 2.5 cm (~1") from the bottom of the iPad. If the iSesamo slips, it will tear the ribbon cable

Begin sliding the iSesamo up along the left edge of the iPad, stopping just before the ribbon cable, approximately 2.5 cm from the bottom of the iPad.

Remove the iSesamo from the iPad.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.