Ana içeriğe geç
Yardım

How to bleed the Stroker Trail

Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Adjust the braking lever to a 45° angle and remove the bleeding screw.

Fill up a quarter of the bleeding syringe with DOT 5.1 brake fluid. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.

Make sure there are no bubbles that can get into the system during the bleeding procedure.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.