Ana içeriğe geç
Yardım

Xbox One Wireless Controller Model 1708 Bottom Motherboard Replacement

Adım 1 Düzenleniyor —

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the three 70mm torx-6 screws from the center of the bottom motherboard.

Remove the two 70mm torx-6 screws next to the rumble motors on the bottom motherboard.

Remove the one 70mm torx-6 screw located on the left side of the bottom motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.