Eşyalarını Tamir Et Topluluk Mağaza

iLive IKBC384S FM/AM Antenna Replacement

Giriş

This is a guide to help replace the FM/AM antenna for the iLive IKBC384S.

Neye ihtiyacın var

  1. iLive IKBC384S FM/AM Antenna Replacement, Top Cover: adım 1, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement, Top Cover: adım 1, 2 resimden 2.

    • Make sure you remove all seven 3 mm screws before proceeding to the next step.

    Düzenle

  2. iLive IKBC384S FM/AM Antenna Replacement: adım 2, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement: adım 2, 2 resimden 2.

    • Use iOpener or heat gun on all sides except the front.

    Düzenle

  3. iLive IKBC384S FM/AM Antenna Replacement: adım 3, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement: adım 3, 2 resimden 2.

    • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

    • The top of the device will be very difficult to remove because of the adhesive holding it together.

    Düzenle

  5. iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: adım 4, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: adım 4, 2 resimden 2.

    • Remove all four screws(13.5 mm in length) that are securing the disk drive.

    Düzenle

  6. iLive IKBC384S FM/AM Antenna Replacement: adım 5, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement: adım 5, 2 resimden 2.

    • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

    • Also, disconnect the two power connectors from the motherboard.

    • Once you have removed the ribbon cables and two connectors on the motherboard the disk drive can be removed.

    Düzenle

  7. iLive IKBC384S FM/AM Antenna Replacement: adım 6, 1 resimden 1.

    • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

    Düzenle

  8. iLive IKBC384S FM/AM Antenna Replacement: adım 7, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement: adım 7, 2 resimden 2.

    • Desolder the antenna at the contact point.

    • Check out this awesome guide for soldering and desoldering tips.

    Düzenle

  9. iLive IKBC384S FM/AM Antenna Replacement: adım 8, 2 resimden 1. iLive IKBC384S FM/AM Antenna Replacement: adım 8, 2 resimden 2.

    • Place iOpener on antenna for approximately 5 minutes

    Düzenle

  10. iLive IKBC384S FM/AM Antenna Replacement: adım 9, 1 resimden 1.

    • Lift up and remove all of the antenna.

    • The antenna will be glued down all the way around the radio

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Tracy Walts

Üyelik tarihi: 03/21/17

201 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Texas Tech, Team S46-G6, Bennett Spring 2017 Texas Tech, Team S46-G6, Bennett Spring 2017 üyesi

TTU-BENNETT-S17S46G6

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 679