iNNEXT N64 Classic Controller D-Pad Replacement

Giriş

This is a guide on replacing the D-Pad for the iNNEXT N64 Classic Controller. Make sure your controller is disconnected from the console before you begin the repair.

Neye ihtiyacın var

Adım 1 Bottom Case

iNNEXT N64 Classic Controller D-Pad Replacement, Bottom Case: adım 1, 2 resimden 1.

iNNEXT N64 Classic Controller D-Pad Replacement, Bottom Case: adım 1, 2 resimden 2.

Turn the controller face down.
Use a Phillips #00 screwdriver to remove the eight screws on the back of the controller.

Düzenle

Adım 2

Insert an opening tool into the seam between the top and bottom case.
Work your way around edge of the controller to release the tabs connecting the top and bottom of the controller.
Remove the bottom case from the controller.

Düzenle

Adım 3 Shoulder Buttons

iNNEXT N64 Classic Controller D-Pad Replacement, Shoulder Buttons: adım 3, 2 resimden 1.

iNNEXT N64 Classic Controller D-Pad Replacement, Shoulder Buttons: adım 3, 2 resimden 2.

To remove the shoulder buttons, lift the buttons labelled with "L" and "R" upwards and out of the controller. There should not be any resistance coming out.
To add the new buttons, put the top notch of the shoulder buttons into the hole right above the control circuit. There should not be any resistance going in. Once done, you can put the back of the controller back on

Düzenle

Adım 4 D-Pad

iNNEXT N64 Classic Controller D-Pad Replacement, D-Pad: adım 4, 2 resimden 1.

iNNEXT N64 Classic Controller D-Pad Replacement, D-Pad: adım 4, 2 resimden 2.

Use a Phillips screwdriver to remove the six screws securing the joystick assembly to the top of the controller.
Gently lift the control panel and joystick assembly from the top cover of the controller.

Düzenle