Eşyalarını Tamir Et Topluluk Mağaza

液晶パネルを開く方法

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Japonca
Adım 2
Opening Procedure, Anti-Clamp instructions: adım 0, 3 resimden 1. Opening Procedure, Anti-Clamp instructions: adım 0, 3 resimden 2. Opening Procedure, Anti-Clamp instructions: adım 0, 3 resimden 3.
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

リバースクランプの使用方法

次の3つの手順では、デバイスの開口作業を簡単にするために開発されたツール、リバースクランプの使い方を紹介します。リバースクランプを使用しない場合は、この3つの手順をスキップして別の方法をご覧ください。

リバースクランプの詳細な使用方法については、 こちらのガイドをご覧ください。

青いハンドルを後方に引き、リバースクランプのアームのロックを解除します。

iPhoneの左/右側の端に向けてアームをスライドします。

吸盤カップを、ホームボタンすぐ上のiPhoneの下端付近に装着します。上部に一つ、下部に1つずつ取り付けます。

吸盤カップ両側をしっかりと握って、当てたい位置に吸引力を加える、装着します。

デバイスの表面が滑りやすく、リバースクランプがしっかりと装着できない場合は、梱包用テープで表面を覆ってから、強いグリップを作ることができます。

[title] Anti-Clamp instructions
-[* icon_note] The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
+[* icon_note] The next three steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Slide the arms over either the left or right edge of your iPhone.
[* black] Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.
[* black] Squeeze the cups together to apply suction to the desired area.
[* icon_note] If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can [guide|159595|use tape|new_window=true] to create a grippier surface.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.