Ana içeriğe geç

iPhone 8 Plus ホーム/Touch IDセンサーの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 3
iPhone 8 Plus Home/Touch ID Sensor Replacement: adım 0, 3 resimden 1. iPhone 8 Plus Home/Touch ID Sensor Replacement: adım 0, 3 resimden 2. iPhone 8 Plus Home/Touch ID Sensor Replacement: adım 0, 3 resimden 3.
  • Pry under the left edge of the home button cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

ホームボタンケーブルをソケットから外すためホームボタンケーブルコネクターの左端を持ち上げます。

コネクターが外れることなく浮き上がった場合、コネクター上端のケーブルをスパッジャーの平らな部分で押さえながらコネクター左端を持ち上げて下さい。ケーブルやコネクターを損傷するとセンサーが無効になるので注意してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.