/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

Samsung Galaxy S7 Edge Vervanging van de batterij

Kılavuza Dön
İngilizce
Flemenkçe
Adım 2
Samsung Galaxy S7 Edge Battery Replacement: adım 0, 2 resimden 1. Samsung Galaxy S7 Edge Battery Replacement: adım 0, 2 resimden 2.

  • Use an opening pick to pry up the battery from the bottom using firm, constant pressure.

  • You will be prying against the case directly above the daughterboard and antenna cables. Pry carefully to avoid damaging either of these components.

  • You may need to reheat and reapply the iOpener repeatedly to further soften to adhesive. The adhesive is tough and it may take a few tries to get the pick started under the battery.

  • Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged. Do not use excessive force or pry at the battery with metal tools.

Gebruik een openingsplectrum om de batterij vanaf de onderkant omhoog te wrikken.

Je zult bij het omhoogwrikken van de batterij direct boven het dochterbord en de antennekabels aan het wrikken zijn. Wees daarom extra voorzichtig om te voorkomen dat je een van deze onderdelen beschadigt.

Het kan nodig zijn om de iOpener een aantal keren opnieuw te verwarmen en op je toestel te leggen om de lijm voldoende te verzachten. Je plectrum zal niet zomaar door de lijm heenkomen, aangezien deze vrij stug is.

Doe je best om de batterij niet te vervormen noch te beschadigen tijdens deze stappen. Soft-shell lithium-ion batterijen kunnen gevaarlijke chemicaliën lekken, in brand vliegen of zelfs exploderen als deze worden beschadigd. Gebruik geen excessieve kracht en wrik de batterij niet los met metalen tools.

-[* black] Use an opening pick to pry the battery from the bottom.
+[* black] Use an opening pick to pry up the battery from the bottom using firm, constant pressure.
[* icon_caution] You will be prying against the case directly above the daughterboard and antenna cables. Pry carefully to avoid damaging either of these components.
[* icon_note] You may need to reheat and reapply the iOpener repeatedly to further soften to adhesive. The adhesive is tough and it may take a few tries to get the pick started under the battery.
[* icon_caution] Try your best not to deform the battery during this process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged. Do not use excessive force or pry at the battery with metal tools.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.