Ana içeriğe geç

iPhone 5 スクリーンの交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 22 kılavuzları etkileyecektir.

Adım 15 çevriliyor

İngilizce
Japonca
Adım 15
iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: adım 0, 3 resimden 1. iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: adım 0, 3 resimden 2. iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: adım 0, 3 resimden 3.
Disconnecting the front panel assembly cables
  • Make sure the battery is disconnected before you disconnect or reconnect the cables in this step.

  • Use a plastic opening tool or a fingernail to disconnect the three front panel assembly cables:

  • Front-facing camera and sensor cable

  • LCD cable

  • Digitizer cable

  • When reassembling your phone, the LCD cable may pop off the connector. This can cause white lines, or nothing at all to appear when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

この手順でケーブルの接続を外したり/再装着する前に、バッテリーの接続が外れているか確認してください。

プラスチックの開口ツールもしくは爪先を使って、次の3つのフロントパネルアセンブリケーブルを外します。

正面カメラとセンサーケーブル

LCDケーブル

デジタイザーケーブル

デバイスを再組み立てする際、LCDケーブルがコネクターから外れることがあります。これは電話の電源を入れた時、画面にホワイトラインや何も表示されない原因となります。もしこの状態が発生したら、単純にケーブルを再接続し、電源を再起動させてください。電源を再起動する方法については、バッテリーの再接続をご覧ください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.