Eşyalarını Tamir Et Topluluk Mağaza

Remplacement du connecteur de charge Lightning et prise jack de l'iPhone 5

Sonraki adım

Adım 1 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 1
iPhone 5 Lightning Connector and Headphone Jack Replacement: adım 0, 1 resimden 1.

  • Remove the following screws securing the Lightning connector assembly to the rear case:

  • One 2.9 mm Phillips screw

  • During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.

  • One 1.5 mm Phillips screw

  • Two 3.3 mm Phillips screws

Soulevez le haut-parleur de la nappe de câble du connecteur Lightning.

Si vous remplacez le connecteur Lightning avec une nouvelle pièce, prenez soin de transférer la coque en caoutchouc autour du microphone. Vous pouvez le faire en utilisant un spudger.

-[* black] Gently peel the speaker assembly away from the Lightning connector ribbon cable.
-[* icon_note] If you are replacing the Lightning connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.
+[* black] Remove the following screws securing the Lightning connector assembly to the rear case:
+ [* red] One 2.9 mm Phillips screw
+ [* icon_reminder] During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
+ [* orange] One 1.5 mm Phillips screw
+ [* yellow] Two 3.3 mm Phillips screws

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.